Which cut line is correct? Don’t know, both sides are screwed twisted beyond belief. This is the start cut, the first 2.5" inches are for kid’s projects… Another chance at loosing a finger or two. The worse part is that these were the best picks of the day. Every other 2X6 (1.5x5.5 for the non-retarded among us) were worse splintered, bent, twisted. They need to dry the wood slowly in a well spaced stack. I wouldn’t wish any of this wood on anyone for anything.
The wood will be stronger, sure, but in modern framing you don’t actually need the added strength. Slowly grown wood is going to be as crooked as fast grown wood. It’s a question about how and where it’s kept. If the wood goes through a lot of drying and remoisturing (not a native speaker, it seems like the wrong word, sorry) the wood will begin to twist and turn. If it’s being kept at a stable moisture and temperature, or at least being dried out consistently, it will stay straight.
But wouldn’t wood that’s more dense absorb less water in the same amount of time though? Meaning that more dense wood would better resist the abuse of transport.
Possibly, but in practice it’s not going to be that much of a factor. If a piece of wood is laying in the middle of a big pile of wood in a warehouse without humidity control or temperature control, with a big garage door opening and closing 1000 times every day, like most building suppliers have, the wood is going to be twisted as fuck no matter how dense it is.