I kept burning my food or wait forever for the pan to heat up and I finally understand why. Each knob has a different direction for the Hi and Lo (also why isn’t it Low).

  • Kushan@lemmy.world
    link
    fedilink
    English
    arrow-up
    31
    ·
    edit-2
    1 year ago

    I’m really trying to understand what’s going on here in a way that makes sense, even if it’s a twisted kind of sense.

    My best guess is that each of these burners are a different size and some have multiple rings and that by turning the knob left (Anti-clockwise), you’re going from smaller number of rings to larger number of rings - however, the rings start at their highest heat level. So looking at the bottom right dial as an example, the first “Notch” on the left is the smallest burner on the highest setting, then as you turn left more, it’ll dial down that burner until you get to the second ring on the burner - starting at full power for that second burner and continuing to lower power until you get to the 3rd ring, then it’s same again for the 4th ring.

    Is that right? am I even close? I don’t understand why you’d go from smallest burner to highest burner anti-clockwise, but go from lowest burner-power to highest clockwise. That still doesn’t make sense to me.

    • dual_sport_dork 🐧🗡️@lemmy.world
      link
      fedilink
      English
      arrow-up
      30
      arrow-down
      1
      ·
      edit-2
      1 year ago

      That’s pretty much exactly how it is.

      OP’s stove is GCRE3060AF, or similar. The rightmost knob is inconsistent for reasons I cannot fathom, unless there is some obscure electrical reason. It is an electric stove, and the knobs with multiple ranges do indeed control burners that have multiple potential sizes. One of them has two selectable sizes, and other has three. On these I believe the rationale is that the high setting is the closest and most easily accessible because radiant electric ranges suck [citation not needed] and since they take forever and a day to heat up most users will just leap right to the full blast output setting immediately. I have no idea why the direction on the last knob is backwards from the others, clockwise versus counterclockwise, but it is.

      If you’re morbidly curious, you can view the entire control panel from OP’s stove (or one similar) here.

          • june@lemmy.world
            link
            fedilink
            English
            arrow-up
            3
            ·
            1 year ago

            I can’t decide if I prefer this (my stove is this way) or bumping the knobs with my hips.

            • AlligatorBlizzard@sh.itjust.works
              link
              fedilink
              English
              arrow-up
              2
              ·
              1 year ago

              My stove has the front knobs, it’s gas, and it’s been bumped on accidentally more than once and someone else walks into the kitchen and has the horrifying realization that the kitchen smells like gas. I think I prefer the electric stove I had as a kid.

              • ThatBaldFella@lemmy.world
                link
                fedilink
                English
                arrow-up
                2
                ·
                1 year ago

                That’s why modern gas stoves have safety valves. There’s a temp sensor near the burner which automatically shuts the gas off if the burner isn’t lit.

            • papabobolious@feddit.nu
              link
              fedilink
              English
              arrow-up
              2
              ·
              1 year ago

              Well that’s fair and relatable. My kid keeps turning on the oven and turning off the dishwasher. Our stove has touch controls on the surface that he hasn’t figured out quite yet, but since it’s an induction stove it turns off pretty quickly if nothing is on it.

              • LazaroFlim@lemmy.filmOP
                link
                fedilink
                English
                arrow-up
                2
                ·
                1 year ago

                Our dishwasher has buttons on the i side. You need to open the door to control it. Then when you close it it looks clean with no buttons.

      • LazaroFlim@lemmy.filmOP
        link
        fedilink
        English
        arrow-up
        13
        ·
        1 year ago

        Yep. It’s. GCRE3060AFF electric stove. (Other thing I hate is the fan noise when the oven is on, even when not on convection). Your idea of Hi closest to off position makes sense except of that triple knob, the 3rd ring Hi position isn’t at the top.

        • BarqsHasBite@lemmy.ca
          link
          fedilink
          English
          arrow-up
          2
          ·
          1 year ago

          Have you Google the fan being on all the time? Ours (different model) doesn’t do that and they really shouldn’t.

          • warling@lemmy.world
            link
            fedilink
            English
            arrow-up
            2
            ·
            1 year ago

            It has to do with keeping the internal circuit boards cool so they don’t overheat due to the heat from the oven. We had a stove that did that too. I hated that thing. It would roar like a jet engine for about 30 minutes even after you turned the oven off.

            • Heisl@feddit.de
              link
              fedilink
              English
              arrow-up
              2
              ·
              1 year ago

              US kitchen appliances are so weird and bad. I don’t get why your stuff doesn’t progress like over here in EU. We get the cleanest, modern, most silent kitchen setups ever.

              • LazaroFlim@lemmy.filmOP
                link
                fedilink
                English
                arrow-up
                3
                ·
                1 year ago

                Because you can make a larger profit by keeping the same design and parts on a crap product and charge you an inflated premium vs selling you a good product with decent R&D and testing. If it’s all crap you can’t tell you’re being fucked. Same thing with sliding guillotinée windows and health insurance.

        • LazaroFlim@lemmy.filmOP
          link
          fedilink
          English
          arrow-up
          4
          ·
          1 year ago

          I’m sure there’s a lazy engineer reason. But as someone who does engineering semi-professionally, come on! You don’t skimp out on UX just because it’s easier to make it this way! There is a reason why Murphy’s Law exists! And in this case it’s actually a fire hazard!

          • intensely_human@lemm.ee
            link
            fedilink
            English
            arrow-up
            1
            ·
            1 year ago

            As a UX designer who became an appliance salesman, I challenge you to invent better UX for these features.

            • LazaroFlim@lemmy.filmOP
              link
              fedilink
              English
              arrow-up
              1
              ·
              1 year ago

              Well, for starter. Pick a direction for Lo -> Hi either clockwise or counterclockwise and stick to it.

              The rotating knob is great. Haptic feedback. You can see it’s off at a clan r from afar. It’s not an encoder but a potentiometer so each position always has the same function hard coded. Just make them all turn in the same direction.

              I would chose counter-clockwise as it’s easier to turn it that way for a right handed person (and that’s how the single burners are designed, all 3 of them (although the warm zone has a weird dead zone for some reason). Start on Lo until it gets to Hi then for multiple ring ones when you hit ring_1 hi and continue you get to ring_2 Lo and so on.

    • LazaroFlim@lemmy.filmOP
      link
      fedilink
      English
      arrow-up
      3
      ·
      1 year ago

      Yes they’re rings. Still doesn’t explain why not everything is in the same rotational direction.

    • TexMexBazooka@lemm.ee
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      That’s what I’m thinking, the different burners have different rings that are individually controlled