I’ve been working on my boot time lately, but I realize I really don’t have a good handle on what it should be. I am hoping some of you will share yours so we can all get a feel for it. I’m including some HW specs here also because I’ve heard it can be relevant:

64GB RAM, 2 x 2 TB NVME:

Startup finished in 9.922s (firmware) + 1.151s (loader) + 3.506s (kernel) + 4.006s (userspace) = 18.586s graphical.target reached after 4.003s in userspace.

Edited to add boot time detail

  • tuto@lemmy.world
    7·
    1 year ago

    Literally don’t personally care about boot time, as long as it’s under 30-60s (currently at about ~5?), and since I reboot like once a month, I don’t really pay much attention to it. How come you want to minimize that so much? Any particular target you want to achieve?

    • NathanUp@lemmy.mlOP
      2·
      1 year ago

      I really just wanted to get a gauge on what a good range is. For my machine, I just want to see how low I can get it without sacrificing needed features or maintainability. 10s would be amazing.

  • corsicanguppy@lemmy.ca
    2·
    1 year ago

    1. a few minutes. Usually I expect 2, claim 5, but when updating gitlab or something equally bloated I’ll need 7-10 for the patch-and-bounce.

    2. no one cares whether it takes a minute extra while you’re getting coffee or when it’s in the middle of the night. The #1 selling feature of systemd is thus moot and it’s truly just a piece of hot garbage.

  • SigHunter@feddit.de
    2·
    1 year ago
    # systemd-analyze time

Startup finished in 39.050s (firmware) + 6.680s (loader) + 993ms (kernel) + 3.519s (initrd) + 22.326s (userspace) = 1min 12.570s 
graphical.target reached after 21.680s in userspace.

    for me, most time is used until the bootloader shows up, because I had to disable “fast boot” in bios because it made some problems on rebooting. pressing enter in grub could speed up 5 seconds more ;-) gentoo, systemd, 2x2tb nvme, 32 gb ram, 4 hdds. could be faster, but it mostly doesn’t matter because I power on the system every morning but don’t use it right away

    edit: on my server, which is not UEFI, therefore has no “firmware” part:

    # systemd-analyze time
Startup finished in 1.814s (kernel) + 47.640s (initrd) + 36.602s (userspace) = 1min 26.057s 
graphical.target reached after 36.602s in userspace.

    and on my laptop, which boots fast AF

    # systemd-analyze time
Startup finished in 4.242s (firmware) + 14.631s (loader) + 1.737s (kernel) + 3.210s (initrd) + 5.136s (userspace) = 28.959s 
graphical.target reached after 4.936s in userspace.
  • Atarian@vlemmy.net
    1·
    1 year ago

    I don’t care about boot time. I switch her on and then go and grab a coffee, by the time I’m done she’s finished booting.

  • addie@feddit.uk
    1·
    1 year ago

    About twenty seconds from ‘power button’ to ‘desktop’ on my laptop, about two minutes on my desktop, mainly because it’s got about 9 disks in it in various RAID patterns, and a discrete graphics card and fancy USB audio and all that shit needs initialised. Doesn’t matter much, they both sleep / hibernate and rarely need restarted

    • NathanUp@lemmy.mlOP
      1·
      1 year ago

      Interesting - I also have a discrete GPU and a USB interface. Do these things add much time?

      • addie@feddit.uk
        2·
        1 year ago

        We’re talking seconds, but on top of ‘twenty seconds’ then it’s a large fraction of the total. The real problem is mounting disks in RAID for me, though - takes quite a while.

  • gian @lemmy.grys.itEnglish
    1·
    1 year ago

    Last time I rebooted the laptop it was about 30 seconds… six months ago.

    Seriously guys, why the boot time that important nowadays ?