For example, I’m incredibly confused about how you’re supposedly to measure liquid laundry detergent with the cap. At least the kind that I have sits on it’s side, so if you measure it with the cap it just leaks everywhere and makes a mess.
Or at my parents house they have a bag of captain crunch berries that has a new design, where instead of zipping along the top of the bag like normal, it has a zipper in the front slightly beneath the top. That way when you poor it you can’t see what you’re doing cuz the bag is in the way. Like what the heck who’s idea was that?
I’ve always thought that most toilet paper holders are over engineered. You don’t need a little springy rod between 2 posts, you just need an L-shaped bar with the short end screwed to the wall and maybe a little knob on the end of the long side to keep the roll from sliding off. And it’s not that the spring style is especially difficult to use or prone to failure or anything, it just seems like a no-brainer to me to use a one-piece holder with no moving parts instead of one that has at least 4 parts (the base, 2 halves of the roller, and a spring) I’m seeing more of that style around these days, which I appreciate.
Stove vent hoods that don’t actually vent outside are fucking stupid. My over the range microwave basically just takes smoke from my stove and blows it back out over my head almost directly at the smoke detector.
I’ve frequently run into shelves, mounting brackets, etc. that seem to totally disregard stud spacing. We got one of those fancy Samsung frame TV’s a while back, to get it to sit so flush to the wall it has its own special mounting brackets, 2 little plates with sort of a modified keyhole slot that you slot 2 little knobs on the back of the TV into. It’s actually not a half bad way to mount a TV, probably one of the easier TV wall mounts I’ve ever personally used, the tv itself is actually pretty damn lightweight (because they moved all the heavy electronics into a separate box you need to hide somewhere) but still I wanted to make sure my fancy TV wouldn’t fall off the wall, so I wanted to mount it to the studs, but of course the spacing of the brackets doesn’t allow that option. I was able to bolt one side a stud but I had to get some toggle bolts for the other side. I’m pretty sure the whole TV is well within the rated weight capacity of one of those toggle bolts in drywall, let alone 2 in drywall and 2 in a stud, but still, it feels like a dumb design choice. (It’s possible that other sizes or newer models do allow for mounting entirely to studs, the size and model I got didn’t)
I helped a friend replace the wax ring on his toilet recently with one of the newer style rubber gaskets, which as it turns out made the toilet sit imperceptibly higher, which meant that the bolts holding it down were no longer quite long enough to screw the nut onto to tighten it down. With a quick trip to ace hardware and a minute perusing my options, I settled on some Danco zero cut bolts, and I definitely think that is a far superior design to the standard bolts that are probably holding down damn-near every toilet you’ve ever used.
On the subject of toilets, I can’t think of any particularly good reason for the tank to be a separate piece from the rest of the throne like on most toilets. The gasket and bolts there just add more places for something to start leaking. It’s probably an ease of manufacturing thing, but we have the technology to make one piece toilets now, the two piece style should be obsolete.
A lot of toilet paper holders are secured to the wall with drywall hangers. An L-shaped one-piece one is basically asking to be torqued right out of the wall.
I’d tend to chalk that up to user error, if you’re putting enough force on your toilet paper holder to pull it off the wall you’re doing something besides just pulling toilet paper off of it or maybe you installed it with the world’s shittiest drywall anchors
Some places you can’t (for whatever reason) install a proper ventilator. Then these with carbon filter will remove some things. But yes, they are far inferior to the full blow vents.
Stove vent hoods that don’t actually vent outside are fucking stupid. My over the range microwave basically just takes smoke from my stove and blows it back out over my head almost directly at the smoke detector.
Amen. The one non-negotiable item when we eventually renovate our kitchen is a vent fan so powerful you should be afraid to bring your small dog into the kitchen when it’s on.
We had one of those downdraft ones and it was similarly useless, worse than useless even though it technically vented outside because it got so disgusting, the vent grate right in the middle of the stove so things fell in, and heat doesn’t go down, it didn’t pull anything when it ran.
The two piece toilet does make installation a bit easier since it’s less weight. I wonder if there are any sort of workplace safety weight limit considerations that come into play. E.g., maybe the 2 piece can be done with 1 person, but a one piece could need 2.